1GE XPON ONU with Realtek chipset
1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. 1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. 1GE ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. 1GE ONU is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
1GE ONU is designed by Realtek chipset 9601D
Feature Supports Dual Mode (can access GPON/EPON OLT). Supports SFU and HGU of EPON CTC 3.0 standard Supports GPON G.984/G.988 standards and IEEE802.3ah. Support NAT, Firewall function. Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect Support port mode of vlan configuration Support LAN IP and DHCP Server configuration Support TR069 Remote Configuration and maintenance Support Route PPPoE/DHCP/Static IP and Bridge mixed mode Support IPv4/IPv6 dual stack Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy Compatible with popular OLT(HW, ZTE, FiberHome…)
Specification Technical Item Details 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm,Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM 10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector 4 LED, For Status of POWER、LOS、PON、LAN 2, for Function of Power on/off, Reset Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） DC 12V/1A <3W <0.2kg
Panel lights and Introduction POWER LOS PON LAN
PON interface
LAN interface
LED
Push-Button
Operating condition
Storing Condition
Power supply
Power Consumption
Net Weight
Pilot
Status
Description
On
The device is powered up.
Off
The device is powered down.
Blink
The device doses not receive optical signals.
Off
The device has received optical signal.
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
On
Port is connected properly (LINK).
Blink
Port is sending or/and receiving data (ACT).
Off
Port connection exception or not connected.
Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Service：Broadband Internet access, IPTV, VOD(video on demand), video surveillance, CATV etc.
