SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength.
By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HUA6000 Series CH04, CH08, CH20 Chassis.
Function
Media conversion
Signal repeating
Lambda conversion
Highlight
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS, LFP
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
Performance Parameter
| System Parameter | Technical Indicator | |
| Center Wavelength | Compliance with ITU-I standardCWDM 1271 ~ 1611nmDWDM 1529.5~1565.50nm850nm/1310nm/1550nm | |
| Data Rate (Gbps) | Fiber Channel: 1/2/4/8 /10GbpsCPRI: 2/3/4/5/6/7LAN or WAN PHY: 1G/10G EthernetSONET: OC-24, OC-48, OC-192SDH: STM-16/64 | |
| 3R Regeneration | Re-amplification, Re-shaping, Re-timing | |
| Optical Interface Type | 8xSFP+ | |
| NMS | TELNET, SNMP, WEB | |
| Size | 191 ( W ) x 253 ( D ) x 20 ( H ) mm | |
| Environment | Operating Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 80℃ | |
| Relative Humidity | 5% ~ 95% Non-condensing | |
| Power Consumption | ≤30W | |
Ordering Information
|
Model |
Function |
Protocols |
Client Side |
Line Side |
|
HUA6000-OTUQS2S |
1.25G~10G Quad Multi-Rate transponder, Converter/Repeater, 8SFP+ interfaces with 3R . | Fiber Channel : 1/2/4/8 /10GbpsCPRI: 2/3/4/5/6/7LAN or WAN PHY: 1G/10GSONET: OC-24, OC-48, OC-192SDH : STM-16/64 |
4 x SFP+ |
4 x SFP+ |
HUA Series Chassis is the foundation for deploying and managing the HUANET multi-service mixed-media solutions.
|
HUA Series Chassis Optional |
|||
|
CH04 Chassis: 482.5(W) x 350(D) x 44.5(H) mm |
1U 19-inch chassis |
1 network management slot |
3 universal service slots |
|
CH08 Chassis: 482.5(W) x 350(D) x 89(H) mm |
2U 19-inch chassis |
1 network management slot |
7 universal service slots |
|
CH20 Chassis: 482.5(W) x 350(D) x 222.5(H) mm |
5U 19-inch chassis |
1 network management slot |
19 universal service slots |
|
Power Consumption: 1U <120W, 2U<200W, 5U<400W |
|||
|
Support SNMP, Web, CLI multiple network management modes |
|||
| Support dual power supply redundancy protection, Power supply support AC: 220V / DC: -48V optional | |||
HUA Series Chassis support multiple service intermixing:
|
100G Transponder |
100G OEO |
4/8/16/40/48 Channel DWDM MUX/DEMUX, or OADM Card |
|
2x100G to 200G Muxponder |
25G OEO |
4/8/16 Channel CWDM MUX/DEMUX |
|
4x25G to 100G Muxponder |
2x10G OCP Transponder |
OLP Optical Line Protection |
|
4x10G SFP+ Transponder |
8×1.25G Convergence 10G Muxponder |
EDFA Card |
Applications
Telecom
Data center
5G Network
Long Haul Network
HUA DWDM transmission solution
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution
