Isikhokelo sokuTshintsha iBhodi yeHuanet OLT Uplink GE-10GE

1. Imeko yoMsebenzi

Okwangoku, inethiwekhi ekhoyo icwangciswe ngeebhodi ze-GICF GE, kwaye ukusetyenziswa kwe-bandwidth yangoku ephezulu kusondele okanye kudlula umda, nto leyo engayi kunceda ekunikezelweni kwenkonzo kamva; kufuneka itshintshwe ngeebhodi eziphezulu ze-10GE.

2. Amanyathelo okusebenza

1. Kwiimeko eziqhelekileyo, olu sebenzi aludingi ukuqalisa kwakhona isixhobo kwaye alubandakanyi utshintsho lwedatha. Nangona kunjalo, kusafuneka ukugcina nokugcina idatha ngaphambi kosebenziso, ukuthelekisa ithrafikhi yezibuko eziphezulu kunye nenombolo ye-MAC ngaphambi nasemva kosebenziso, kunye nokuqinisekisa amandla okukhanya ezibuko, i-CRC kunye nolunye ulwazi.

2. Uhlobo lwebhodi oluza kutshintshwa yi: H801X2CS, enokutshintsha ngqo ibhodi ye-GICF.

(Iinguqulelo ze-V800R011SPH110 nangaphezulu,

Iinguqulelo ze-V800R013C00SPC206 kunye nezamva,

V800R013C10SPC206 kunye neenguqulelo zamva nje

inguqulelo esisiseko ye-V800R015 nangaphezulu)

Oko kukuthi, udinga kuphela ukukhupha ibhodi yokuqala uze ufake ibhodi ye-X2CS ngqo, enokubuyiselwa ngokuzenzekelayo ngaphandle kokusebenza ngesandla.

3. Xa utshintsha, ungayitshintsha ngokulandelelana, oko kukuthi, tshintsha ibhodi enye kuqala, uze uyitshintshe enye xa iqhelekile; phantsi kweemeko eziqhelekileyo, akuyi kuyichaphazela ishishini.

4. Ukutshintshwa kwebhodi ye-10GE kwicala le-OLT akufuneki kutshintshe idatha ngokwesiseko, kodwa izixhobo ezisezantsi kufuneka zilungise idatha.

3. Ukuphathwa okungaqhelekanga

1. Emva kokutshintshwa, ibhodi ayinakuqalwa, isibane se-RUN sibomvu, i-port ayinakuphakanyiswa emva kokutshintshwa, okanye inkonzo ayiqhelekanga. Nceda unxibelelane neenjineli zeHuawei ukuze ufumane unobangela.

2. Indlela yokubuyisela umva: Xa ukutshintshwa kungaphumeleli kwaye kufuneka kubuyiselwe umva, cima yonke idatha ye-uplink, uze ucime ibhodi ye-X2CS, ufake ibhodi ye-GICF, uqinisekise ibhodi, ubuyisele idatha, kwaye uqinisekise inkonzo.